4 ways to clean your carpets

Qualified carpet cleaning organizations use various carpet cleaning methods to clean a home’s carpets. Each cleaning method has its own certain positive aspects and disadvantages. But how do you select amongst them? Critique these benefits and drawbacks just before deciding which method you would prefer to be applied to clean your carpet.

Generally, carpet cleaning techniques could be placed in one of two categories: wet cleaning or dry cleaning. Wet cleaning involves hot water extraction and may include cleaning with an absorbent pad. Dry carpet cleaning involves the usage of chemical powders or foams applied by unique machines with counter rotating brushes, pads or cylinders.

1. Wet cleaning
How it operates

Also called hot water extraction or steam cleaning, the carpet is 1st pre-conditioned with a chemical reagent that liquefies soils and oil-based substances which might be present inside the carpet fibers. Water is heated to a temperature near its boiling point and pressurized, then injected into the carpet. Immediately after about 10 to 15 minutes, the option is extracted with a vacuum.
Want experienced help together with your project?
Get quotes from top-rated pros.


Gets out soiling from deep down in the carpet.

Makes it possible for the use of high temperatures, pressures and chemical concentrates.

Permits extended dwell instances for reaction of cleaning solvents.

Chemical reactivity facilitated by agitation with grooming tool or extraction wand.

Most broadly applied system.

Suggested by carpet companies and business cleaning professionals and pros


Relatively long drying time, but this could be reduced with all the use of highly effective equipment by competent technicians.

Highly-priced equipment normally essential for maximum efficiency.

Fairly higher price components.

two. Cleaning with an absorbent pad
How it performs

This carpet cleaning system is also generally known as bonnet cleaning and is most usually utilized for routine light upkeep. It may also be employed for frequent carpet cleaning. The carpet is first vacuumed, then a chemical option is sprayed on to it using a hand pump or electric sprayer. The remedy is permitted to remain around the carpet for a suitable dwell or reaction time.

The absorbent pad or bonnet, which looks like a towel, is placed around the drive block of a rotary floor machine and spun over the carpet surface at one hundred to 300 rpm. This action serves to impregnate the carpet fibers together with the chemical resolution and after that choose it up with the soils afterward.


Speedy, simple and inexpensive.

Excellent outcomes with lightly soiled carpets.


Only cleans the top rated one-third of carpet fibers, incapable of reaching deeper down.

Leaves dirt and chemical compounds to accumulate at the bottom with the carpet fibers.

three. Dry cleaning with an absorbent compound
How it performs

A powder that has been mixed with unique solvents and cleaning agents is spread over the carpet, then worked into the carpet fibers using a machine fitted with counter-rotating brushes. The powder absorbs soils within the carpet fibers. Immediately after it’s allowed to set on the carpet for 10 to 15 minutes, it is vacuumed up.


Quite very simple system with no unique technical training needed.

Quite speedy drying, it ordinarily only takes about 20 minutes just before the carpet is often back in service.


Powder may be trapped in plush pile carpets and left to make up over time.

May cause excessive dust build-up within the residence.

Unable to clean deep down in to the carpet.

four. Dry foam or rotary shampoo approach
How it operates

A cleaning agent is applied towards the carpet to help suspend dirt and debris in the carpet, which can be then whipped into foam and worked in to the carpet fibers using the rotating brushes of a particular machine. Right after a brief dwell time, the foam is extracted having a vacuum.


Fast, straightforward to apply and low-cost.

Rotating brushes give great agitation.

Modest amount of moisture permits fast drying of carpet.


Unable to attain thorough soil extraction beneath the surface of your carpet.

Higher temperatures usually not accomplished.

Excessive wetting possible with gear malfunction.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *